COA Model 127 Direct Oil & Grease Analyzer
The world’s first Spark OES Direct Oil and Grease Analyzer: (download Brochure)
No limitation to the size of wear metal debris/particles
Enhanced and extended reports on wear metals less than 3 minutes
All languages software user interfaces and reports
Toolbox size hand-portable (<19 lb or 9 kg)
Lowest cost
Specifications
Analytical method: spark OES (SFE graphite electrodes--ASTM D8315 and similar to D6595)
Wear metals and foreign elments: 0-2400 ppm (w/w). Approximately. Al, Cu, Fe, Cr, Na, Pb, Si, Sn, Ag, K, Ti,
Cd, Mn, Ni
Oil & grease additive elements: 0-8000 ppm (w/w). Approximately. Ca, P, Zn, Mg, B, Li, Mo, Ba, V
Time of analysis: 2.8 minutes (maximum)
Sample volume required: <1.5ml
Sample viscosity: unlimited
Maximum detectable wear metal debris size: >200 um
Electrodes:
Upper : regular rod graphite electrode
Lower: flat graphite electrode
Calibration standards (ppm by weight):
21 or 21+K (50 or 100);
MA4 (Ca 5000, P, Mg, Zn: 1600);
Li: 1000 ppm, user de-selectable on User Interface;
Blank oil.
Note: calibration of more elements is available upon request
Main spectrometer resolution: 0.1 nm (FWHM)
Power supply: 97-230 VAC/40-70Hz, 14 Amps
Operational temperature: 3-27 °C
Operational humidity: 0-80% non-condensing
Operational altitude: up to 5000 meters above sea
Computer OS: MS Windows XP or newer
Dimensions and Weight:
COA Model 127: 13” x 13” x 11”, 19lbs or 34cm x 33cm x 29cm, 8.6kg
COA Model 126: 22” x 19” x 19”, 36lbs.or 48cm x 48cm x 48cm, 17kg
Reporting
Regular elemental report, including possible wear metal particles in concentration
Concentration of non-suspendable particles (CNSP)
Concentration surges caused by possible large wear metal particles
Consumables
Electrodes:
Upper: regular rod graphite electrode for RDE, max length allowed: 150 mm
Lower: flat graphite electrode
Calibration standards (ppm by weight):
1) 21 or 21+K (50 or 100);
2) MA4 (Ca 5000, P, Mg, Zn: 1600);
3) Blank oil.
4) (Optional) Li: 1000 ppm, user de-selectable on User Interface;
Note1: all standard oils are available from common vendors
http://www.scpscience.com: stardard oil and rod electrodes
http://www.lgcstandards.com: stardard oil only
Note2: calibration of more elements is available upon request
Note3: each calibration consumes about 1 ml standard oil or less
Sample Economy
Each sample or calibration consumes a flat electrode. Currently, the flat electrode is shipped from China. With current currency exchange rate, the price is $0.79 ea, plus shipping and handling fees.
The rod electrode is consumed as in a regular RDE oil analyzer.
Consumption of standard oil:
Made by cutting-edge technology, COA oil and grease analyzer is a very stable analyzer. Though users can run routine calibrations as recommended, the calibrations do not affect results too much. Thus many users do not run daily calibrations, which cuts the cost on consumables.
In general, the cost of testing a sample is about $1, also depending sample volume.
Software
All software is distributed or upgraded via email or a CD-ROM, and runs on a personal computer.
In order to utilize small CCD spectrometers to detect wear metals, CYCP Oil Analyzers LLC has developed the most sophisticated software in this industry to pick up 22 and more elements from heavy noise-corrupted OES signals. No other OES oil analyzer manufacturers in the world can achieve this in a portable on-site oil analyzer.
CYCP Oil Analyzers LLC also has a set of sophisticated software for remote instrument troubleshooting. A unique feature is that, you do not need an internet connection to your analyzer. Without a physical network, we can still figure out what might have gone wrong and remotely modify instrumental parameters if necessary. Is that fanny?
Multi-Language Support
COA instrumental user interface and analytical reports support all languages in the world. Customers themselves can switch the original English user interfaces to other languages (An example of different language user interface). So does for report.
COA instrumental software is free for all potential customers!
Remote Services
COA analyzers are designed to be supported remotely without having to use internet connections. Users can email certain files upon our instructions for troubleshooting purpose. Software upgrades are also accomplished via email.
Disclaimer-some items, information or specifications above may be changed without notice.
Developed, Originally Patented, Made, and QA/QC Tested in America